Shop All Hardwood

On concrete, the slab must be clean, flat, and dry before you install engineered hardwood flooring, and many products also require a moisture barrier or approved underlayment. Always test for moisture and follow the product instructions, because concrete-related moisture is one of the biggest causes of flooring failure.

To remove glue from a hardwood floor during installation cleanup, start with the adhesive manufacturer's recommended cleaner and use the gentlest method that works. Avoid soaking the floor or scraping aggressively, because moisture and sharp tools can damage the wood or the finish.

Hardwood on stairs requires very accurate cuts, secure attachment, and a proper stair-nosing system that matches the flooring product. Most installers finish one step at a time and follow the manufacturer's instructions closely, because stairs are more visible and more safety-sensitive than flat floors.

To install hardwood flooring, start by removing the old floor if needed, checking that the subfloor is clean, flat, dry, and structurally sound, and letting the material acclimate if the manufacturer requires it. After subfloor prep and layout, begin from a straight reference line, stagger end joints, fasten or glue the boards according to the product type, and finish with trim and transitions. Always read the product instructions first, because the required underlayment, adhesive, moisture barrier, spacing, and fastener schedule vary by brand and substrate.

To install laminate flooring, start by removing the old floor if needed, checking that the subfloor is clean, flat, dry, and structurally sound, and letting the material acclimate if the manufacturer requires it. Lay the proper underlayment if required, start with a straight first row, stagger the joints, maintain the expansion gap, and lock each plank tightly in place. Always read the product instructions first, because the required underlayment, adhesive, moisture barrier, spacing, and fastener schedule vary by brand and substrate.